• Products
  • Wholesale/Login
  • Contact
    • About E6000 Australia
    • Terms Conditions
E6000 Wholesale - Australia
  • Products
  • Wholesale/Login
  • Contact
    • About E6000 Australia
    • Terms Conditions

E6000 Product Instructions

Follow these directions when using Regular E6000 Adhesive

1. Use in a well-ventilated area only.
2. Surface should be clean, dry and free from dirt.
3. Roughen surface before use.
4. Best when used between 21°C and 29°C.|
5. Apply E6000 directly to the surface.
6. For maximum strength, allow bond to dry for 24-72 hours.
7. Cure time increases in lower temperatures, decreases in higher temperatures.
8. Clean uncured adhesive with acetone.
9. Cured material may be removed by cutting and scraping.
10. Not for use on polystyrene, polyethylene or polypropylene plastics.
Picture

E6000 Scientific Specifications

Cured E6000
Hardness: 80A
Tensile strength: 3,500 lb/in2 (ASTM D-412)
Elongation: 900% (ASTM D-412)
Chemical resistance: excellent to water, dilute acids & bases
Temperature range: -40 °C to 66 °C
Paint-over time: 24 hours
UV resistance: paint over with UV Sealer if required
Dielectric strength: 400 V/mil (ASTM D-149)
Un-Cured E6000
Solids: 30% by weight
Density: 11.1 lbs./gal.
VOC: 1.198 grams/liter
Tack time: 5 minutes
Full cure time: thin film: 24 hours; thick film: 48-72 hours
Storage: store between 10 °C and 27 °C
Freeze/thaw stability: yes; open and use at room temperature.
Color: clear
Viscosity: 50,000 cps (Low), 100,000 cps (Med), 200,000 cps (H)
Shelf life: 2 years, when left unopened

MSDS & Technical Data Sheets

Use these links to download PDF copies of the official Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS). These documents are provided for information purposes and to comply with relevant legislation regarding chemicals, DG Management and Workplace Health & Safety.
msds.pdf
File Size: 54 kb
File Type: pdf
Download File

tds.pdf
File Size: 176 kb
File Type: pdf
Download File


FOR ALL POISONS RELATED EMERGENCIES (WITHIN AUSTRALIA ONLY) PLEASE CALL
POISONS INFORMATION CENTRE - PHONE 13 11 26 
or  Emergency - PHONE 000

Product Returns & Warranty

This product and the transactions associated with it are subject to relevant laws within Australia. Alexandra Bay Pty Ltd complies with the Trade Practices Act. The following will not detract in any way from the consumer rights as dictated by relevant legislation. If any part of the following information is found to be in breach of legislation or unable to be upheld is to be omitted without affecting the remainder.

Returns & Refunds: A product may be returned in original sealed unaltered condition within 90 days of purchase for a full credit of original purchase price excluding any freight and handling charges, to be applied to a future purchase. A full refund is available if a product is faulty, incorrectly described or not fit for a stated purpose.

Limited Warranty: The product is warranted against any defect in materials or workmanship, providing a claim is made in writing within 6 months after the sale of the product. Alexandra Bay Pty Ltd makes no express or implied warranties of any kind, including the implied warranties for fitness for any particular purpose other than those stated herein. THE REMEDIES PROVIDED HEREIN ARE THE EXCLUSIVE REMEDIES TO BUYER, AND SELLER SHALL NOT BE LIBEL FOR ANY LOSS, INJURY, OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM FAILURE OF THE PRODUCT OR ANY DEFECT IN THE PRODUCT SOLD HEREUNDER, OR ANY DELAY IN PERFORMANCE BY SELLER, NOR WILL SELLER BE LIABLE FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR ECONOMIC DAMAGES OF ANY KIND, OR FOR CONTRIBUTION OR INDEMNITY CLAIMS, HOWEVER CAUSED, WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE.
© 2017-2022 Alexandra Bay Pty Ltd Australia.  The Australian Wholesaler for Genuine E6000 Adhesives. E6000, associated branding and imagery, product photos and the E6000 logo © and registered trademarks of Eclectic Products Inc. Eugene, Oregon, USA.
  • Products
  • Wholesale/Login
  • Contact
    • About E6000 Australia
    • Terms Conditions